Opening and closing task lists

Write short opening and closing lists once, for every shift or only chosen areas, positions and people. Staff see them on the shift card, tick them on their phone or the kiosk, and every timesheet shows what was ticked. A list never blocks a clock punch.

Most venues run opening and closing on a laminated sheet or a group chat. Roster puts the list where the work starts and ends: on the clock. Step by step, with screenshots: Set up opening and closing task lists.

Links on this page go straight into the app; if you're not signed in you'll be asked to log in first.

Setting up a list

Go to Settings, Venue, Task lists and tap Add an opening list or Add a closing list. Each starts from a plain example (unlock and turn off the alarm, lights and music on, coffee machine on, float counted, bathrooms checked, specials board written; coffee machine cleaned, bins out, floors, float counted, fridges checked, lock up). Change the words, add or remove tasks, and save. Blank list starts from nothing.

Each list has:

  • A name staff see on the card.
  • When: at clock-in (an opening list) or before clock-out (a closing list).
  • Which areas, which positions and which people: every shift, or only shifts in the areas and positions you pick, or only shifts worked by the people you pick. Every scope a list names has to match, so a kitchen closing list for chefs and a floor closing list for front of house can run side by side, and a till-count list can go to the two people who open. An open shift has nobody on it yet; it gets a people list once someone is assigned.
  • Required on each task. A required task that is still unticked asks the worker once, "2 closing tasks not ticked. Clock out anyway?". It never stops them clocking out, and their clock-out time is the moment they confirm.
  • On to pause a list without deleting it, over a closure say.

Nothing is seeded: a venue with no list sees nothing at the clock.

Lists on one shift

Open any shift on the schedule, draft or published. The Task lists row shows which lists it carries from its area and position. Add a list to this shift… adds any other list for that shift only, say a deep-clean list on the Friday close. The list itself stays in Settings, so an edit there reaches every shift that carries it, and copy week and templates keep the added lists. Tick No task lists this shift for a one-off with none; that tick is never copied. The row appears once the venue has a list that is on.

On the schedule itself, hover a shift to see the lists it carries ("Opening list · Closing list", or "No task lists this shift"). The card stays clean at rest, since on most venues every card would say the same thing.

What staff see

Before the shift. Their shift card shows Opening list · 6 and Closing list · 6, the shift's page lists the tasks under Before you start and Before you go, and Home shows an On this shift card for the next shift. Read-only until they clock in.

On their phone. After they clock in, the opening list appears on their home screen under the shift card, one big row per task. A tap ticks it and saves on its own; tapping again unticks. Once every task is ticked the card folds to one line, "Opening list done". The closing list sits under it, folded until tapped, and stays on the wrap-up screen after they clock out so a missed tick can still be made.

On the kiosk. After a clock-in on the kiosk, the opening list shows with a Done button and a Skip for now that returns to the names. On a clock-out with required closing tasks unticked, the kiosk asks "Clock out anyway?" before the punch, then records the punch and offers the closing list to tick, with Done returning to the names. During the shift, tapping their name shows a Task list button next to Start break and End shift, so the list can be ticked on the tablet as the work gets done. Every kiosk screen is one tap from the names.

How staff tick

Four switches at the bottom of Settings, Venue, Task lists, each saved as you switch:

  • Tick on their phone (on). Works even when clocking in from a phone is off, so a tablet-only venue still ticks on phones.
  • Tick on the kiosk (on). The list after a punch and the Task list button mid-shift.
  • Ask before clocking out (on). The one-line "Clock out anyway?" question. Off, the punch just records.
  • Email when closing tasks are left unticked (off). After a clock-out with required closing tasks unticked, the worker gets an email where a tap ticks each task, and the manager who published their roster gets the same list with a link to the timesheet. One email per shift, sent within the hour; nothing when every required task is ticked.

What you see

Open any timesheet and the review panel shows Opening 5/5, Closing 3/4. Hover or expand a line to see which tasks were not ticked. The Activity Log records every tick and untick with the list name and whether it was made on a phone or at the kiosk, and every change a manager makes to a list.

Common questions

Does a list hold up the clock? No. The punch is recorded first, every time, on the phone and on the kiosk. The list is a separate tap afterwards, and the only thing a required task changes is a one-line question before clock-out, which you can switch off.

Do staff have to tick at the start or the end? No. The list is there for the whole shift, on their phone from clock-in and on the tablet through the Task list button, and it stays on the wrap-up screen after they clock out. Start and end are just when the kiosk offers it.

What happens once a list is done? Nothing is submitted. Each tick saves on the spot, the timesheet shows the count, and the Activity Log has the detail. If you want to hear about the ones that were not finished, turn on the email above.

Can I change a list after the week is published? Yes. Lists are read live, so an edit in Settings reaches every shift that carries the list, published shifts and shifts you added it to included.

Staff come in early to do the opening list. Do I pay from the punch? By default, yes. Turn on True up early starts to the roster in Settings, Venue, Timesheets to pay from the rostered start instead; the real punch stays on the timesheet. Details in Kiosk mode.

A worker says the list did not show. Check the list is On and that the shift's area, position and person match the list's, or add the list to that shift from the schedule. An unscheduled shift started with no area only gets lists set to every area.

Opening and closing task lists - Roster by Supp